This is the specifications of the Mark 3 GR taken from a new boat sales page These boats have been the same spec. for many many years They are very robust,The material is the toughest thickest Hypalon purchasable All the floor boards are complete etc 2 x original paddles. There are two bags , one for the boat , and one for the boards . I have also purchased a brand new pump which is included in the sale There is a seat (bench type) and a front bow locker kit also available as optional extras The white marks on the hull are talcum powder where the boat was properly prepared for storage I cannot find a single patch on the boat. It has two holes drilled in the transom which were the mounting bolt holes for the engine These will probably line up to the engine you put on so have not been filled An elephants trunk drain has been added and will work well and there are 2 bungs for straight drainage as normalNo engine or trailer is included with the boat but I can quote you for both new to go with it.NB This boat is now £11,000 to buy new so grab a real bargainSPECS. 4.70m long 1.93m beam V bottom - inflatable keel Weighs empty approx 127 kgs Roughly the folded dimensions Hull 145 x 75 x 52 Boards 105 x 77 18 cms Passenger number allowed including helmsman is 10 Max payload allowed (this includes the engine ) is 1038 kgsMax HP on tiller is long shaft 60hp